- Crank Mechanism[2]
- Other Auto Parts[1]
- Auto Bearing[2]
- Hardware Stock[2]
- Other Hardware[1]
- Belt Making Machinery Parts[2]
- Chemical Product Machinery[2]
- Concrete Truck[1]
- Engine Parts[2]
- Other Bearing Accessories[1]
- Angular Contact Ball Bearings[31]
- Ceramic Ball Bearing[2]
- Deep Groove Ball Bearings[100]
- Other Ball Bearings[1]
- Self-aligning Ball Bearings[30]
- Thrust Ball Bearings[28]
- Linear Bearings[4]
- Needle Bearings[31]
- Other Bearings[12]
- Pillow Block Bearings[33]
- Rod End Bearings[16]
- Cylindrical Roller Bearings[38]
- Other Roller Bearings[15]
- Spherical Roller Bearings[67]
- Taper Roller Bearings[36]
- Thrust Roller Bearings[13]
- Slewing Bearings[18]
- Sliding Bearings[18]
- General Mechanical Components Design Services[1]
- General Mechanical Components Stock[2]
- Hydraulic Parts[1]
- Other Mechanical Parts[4]
2011 newest Slewing Bearings
1slewing bearing
2Material GCr15,GCr15SiMn
3Certification ISO9001:2008
4Supply best quality and competitive price bearings
Cage
1. Ribbon cage, including one or two wave-shaped ring composed of the rolling bearing cage parts.
2. Retainer pocket (window) hole hole or opening the cage to accommodate one or more rolling elements.
3. Retainer beam part of the cage to the adjacent cage separated by pocket holes.
4. Retainer claws from the cage or half cage out of the cantilever.
5. Maintain the shelf is generally cylindrical pillar pillars can be through the use of roller axial hole.
6. Rib cage guided by the bearing rings on the washer or bearing surface for the radial shoulder guide (centering) of the cage.
Rolling
1. Ball ball rolling
2. Roller has its axis of symmetry and the vertical axis line Ren Yiping plane showed a circular cross-section rolling.
3. The ball (roller) bearing t
he whole within a particular all ball (roller).
4. The ball (roller) group within a rolling ball (roller).
5. Cylindrical Roller roller outer surface of the bus is basically a straight line and parallel with the roller axis line.
6. Needle length and diameter, the larger the ratio of small-diameter cylindrical roller, the general length of the diameter between 3 to 10 times, but the diameter of usually not more than 5mm. Needle head can have several shapes.
7. Tapered Roller roller outer surface of the bus is basically a straight line and intersecting with the roller axis line, usually cut cone.
8. (Convex) spherical roller roller convex outer surface in the plane containing its axis line to the convex arc.
9. Concave roller roller at the outer surface of the plane containing the axis line within the concave arc.
10. Symmetric spherical roller spherical roller outer convex surface of the roller through the middle of the plane perpendicular to their axis lines on both sides are symmetrical.
11. Non-symmetric convex spherical roller spherical roller through the roller outer surface of the central axis line perpendicular to their plane on both sides of a non-symmetrical.
12. Convexity essentially cylindrical roller or the outer surface of conical roller roller axis line that contains the plane, convex curve was continuous to prevent the roller in contact with the raceway end to produce stre
ss concentration.
13. Dressing roller in the roller end of the outer surface, its diameter slightly amended in order to prevent the roller and raceway contact stress concentration end.
14. Spiral roller made of steel spiral section around the roller.
15. Roller face the basic axis perpendicular to the roller surface end of the line.
16. Roller or large end of tapered roller bulk of symmetric spherical roller end.
17. Roller small end of tapered roller or spherical roller symmetrical face a small head.
18. Chamfered roller roller end face connected with the outer surface of the surface.
Bearing washer
1. Axis mounted on the shaft bearing ring gasket.
2. Seat installed here within the bearing washers.
3. In both sides of the raceway ring bearing washers, Thrust bearing for double row rolling elements between the two.
4. Self-aligning ball seat with seat back t
o accommodate the axis line and a permanent seat axis angular displacement between the lines.
5. Aligning seat washers for aligning seat ring and the shell to withstand the thrust washers between the surface, the surface is concave spherical surface and aligning the ball on the back seat match.
Jinan Kelunte Bearing Co., Ltd. is located in Jinan, Shangdong. We are as a specialized manufacturer and exporter of bearings. And has passed ISO9001-2000 quality system certification, the products are widely used. Welcome to visit our factory website The bearings you need, I plant on the customer's commitment: responsible for quality in the end, the customer service in the end.
***********************************************
Tiffany
Sales manager
Mobile: 86-13705409748
Jinan Kelunte Bearing Co.,LTD
Website: http://www.kltzc.com
http://kelunte.en.alibaba.com
***********************************************
